From the surface shape, the crimp nut column is a crimp standard fastener with internal thread. The screw-in direction of the riveting screw is the exposure direction of this type of fastener. The types are: grounding studs; meditation studs; riveted studs; kneading studs, reamed studs, double-headed studs, usually several types of studs.
In addition to the definition of studs and nuts according to the working conditions, they can also be distinguished by their types: the length code of the stud code indicates that some length is exposed after pressing and riveting, and the nut indicates that some length is pressed.
Pressure rivet nut columns are usually used in a wide range of scales, and many are used locally. For example, the sheet metal profession is used to press riveted metal plates. For example, there are many useful cases on the cabinet. Of course, some electronic goods, electrical goods, machinery goods, etc. will also be useful.
In addition to the definition of studs and nuts according to the working conditions, the professional standards for crimping nut studs can also be distinguished by their types: the length code of the stud code indicates that some length is exposed after crimping, and the nut indicates that it is pressed Some lengths.
Double-headed studs, in the connector profession, also use the following double-headed studs-DSOS-440-275, DSO-M3. There are only two thread standards for this type of studs, which require connection screws at both ends. DSOS is a raw material for stainless steel, which is relatively common; DSO is a common carbon steel, which is less commonly used.
Pressure rivet nut columns are usually used in a wide range of scales, and many are used locally. For example, the sheet metal profession is used to press riveted metal plates. For example, there are many useful cases on the cabinet.
